top of page

Adjustable Cable Management Tray Setup Guide

Thank you for choosing us! Following the feedback received from our customers, the design of our Cable Management Tray has been tweaked to enhance stability and protection to the tabletop.


Let us walk-through this product together.

Unbox

Package Includes

  • 1 set of tray body - 1 inner body & 1 outer body.

  • 1 pair of L-shaped No Drill Mounting Frame with clamps

  • 1 set of 6 pieces rectangular foam spacers

  • 1 set of 4 pieces circular foam spacers

  • 7 sets of bolts and nuts

  • 1 mini screwdriver


Any other items found in the box are the additional items in the bundle you had purchased.

Product Overview

Detailed Explanation

Detailed Explanation

Step 1 (Optional): Stick Foam Spacers

This step is optional, but highly recommended to protect the corner of your table.


Stick the rectangular foam spacers on the underside at the top corner of the Mounting Frame, where the tray will be clamped on the tabletop. The foam spacers should cover the entire corner of the table. Two rectangular spacers should be used on each Mounting Frame. 

Rectangular Foam Spacers Required: 4pcs


Stick the circular foam spacers on the top of the Movable Jaw. One circular spacer should be used on each Movable Jaw.

Circular Foam Spacers Required: 2pcs


Step 2: Install Mounting Frames

Install the left and right side of the Mounting Frames on the Tray Body with bolts and nuts. Ensure that the frames are mounted at the sides, facing the same direction.


Two bolts and nuts at each side are used to secure the Mounting Frames and the Tray Body. Tighten the screw with a screwdriver, and use your fingers to hold the nut. A spanner may come in handy for extra torque.

Bolts & Nuts Required: 4 sets

Tool Required: Screwdriver

Optional Tool: Spanner


Step 3: Adjust to Desired Length

Estimate the space required for your set up, and adjust the tray to the desire length. Be sure to align to the designated holes for the bolts and nuts.


Secure the desired position by attaching the bolts and nuts at the designated holes. You may wish to hand-tighten these bolts and nuts for a trial run on whether the length is suitable for your set up.

Bolts & Nuts Required: 2 sets

Tool Required: Screwdriver

Optional Tool: Spanner


Step 4: Tighten All Bolts

Tighten all screws with the screwdriver. Similar to step 2, you may use your fingers to hold the nut while tightening the bolt, or use a spanner for extra torque.

Tool Required: Screwdriver

Optional Tool: Spanner


Step 5: Install on the Table

Attach the Cable Management Tray on the tabletop. Rotate the handle of the Movable Jaw in anti-clockwise direction to elevate and tighten the clamps.


You are ready to use the Cable Management Tray.


Questions?

Should you have more questions, feel free to drop us a message! 


If all works well, please remember to click on "Order Received" and rate your experience with us! If not, drop us a message and we will assist you accordingly.


Have a nice day!

bottom of page