X15 Wireless Earphone Quick Start Guide

Thank you for shopping with us! Let's go through this product together.


Content

  • Unbox

  • Product Overview

  • Pair Bluetooth with your phone

  • Charging your device

  • Headphone touch functions

Unbox

Once you have opened the box, check that you have the X15 Wireless Earphone and the charging cable. Remove all protective sheets attached on the product, including the protective sheet attached on the display. If the protective sheet is not removed, the screen will look as though it is badly scratched (See picture above).


Check whether you have the following items in the box

  • 1 piece X15 Wireless Earphones with charging case

  • 1 piece 0.25m USB Type-C Charging Cable

If any of the above-mentioned items are not in the box, please let us know.

Product Overview

Pairing Bluetooth with your phone

Pairing Bluetooth with your phone

Procedures

  1. Turn on Bluetooth on your phone

  2. Remove the earphones from the charging case

  3. Select "Pair new device"

  4. Select "X15" under available devices

  5. Select "Pair" when asked to pair with X15

  6. Device connected

After the first pairing of this device with your phone, you do not need to pair it again in the future.


Subsequent Connection

  • Turn on your Bluetooth

  • Remove the earphones

  • The earphones will automatically connect to your phone

Charging your device

Charging your device

To charge the charging case, simply connect any USB-A to USB-C cable (rated 0.2A and above) to the charging port. We observed that only 0.2A will be used to charge the device, it is fine to connect a fast charging cable. However, do note that the charging duration will not be quicken as the current will not change.

To charge your earphones, simply place them back onto the charging case.

Headphone Touch Functions

Headphone Touch Functions

You may turn off the earphone without placing them back on the charging case. Place your finger on the touch sensor and hold for 5 seconds, the earphone will be switched off. If this device is not connected to a device for more than 5 minutes, it will shut down automatically.


To switch on the earphone, place your finger on the touch sensor for 3 seconds. On both instances, a "Power on" or "Power off" announcement will be made in the earphone.

Now we are done with our introduction of this product. Should you have more questions, feel free to drop us a message! 


If all works well, please remember to click on "Order Received" and rate your experience with us! If not, drop us a message and we will assist you accordingly.


Have a nice day!